OVERVIEW
Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.
Meet the newest additions to the DuraTech family of grinders, the Model 5064 & Model 9564 Horizontal Grinders. These Heavy Duty grinders are equipped with CAT engines; Tier III (5064, 5064T) and Tier II (9564). An HPTO wet clutch transfers power to the hammermill which is fed by a self governing floor apron and feed roller to meet your specific requirements of productivity and efficiency.
OVERVIEW
Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.
OVERALL SPECIFICATIONS
9564 | |
---|---|
WEIGHT: | 70,560 LBS |
TRANSPORT WIDTH: | 8′ 42″ |
TRANSPORT HEIGHT | 13′ 1″ |
TRANSPORT LENGTH: | 39′ 5″ |
AXLE: | (3)-22,500 lbs |
ELECTRICAL: | 24 VOLT |
TIRES: | (6) 445/50R22.5 Super Singles |
FUEL CAPACITY: | 300 Gallons |
HYDRAULIC OIL CAPACITY: | 145 Gallons |
ENGINE: | Caterpillar C15 540 HP Tier III Electronic Diesel |
CLUTCH: | HPTO 14 TD Wet Clutch |
HOPPER WIDTH: | 61-1/2″ Bottom
74″ Top |
HOPPER LENGTH: | 13′ 2″ |
DEPTH: | 35″ |
HOPPER CAPACITY: | 197 Cubic Feet |
FEED OPENING: | 61-1/2″W x 35″H |
HOPPER LOADING HEIGHT: | 96″ |
FEED ROLLER: | 36″ D |
DISCHARGE CONVEYOR: | 26’L x 48″W |
BELLY CONVEYOR: | 54″W x 22’L |
HAMMERS: | 32 Single Bolt Hammers |
STANDARD FEATURES
The Model 9564 Horizontal Grinder is the newest member to the DuraTech Line up of industrial grinders. It comes with the CAT C27 Tier II Diesel engine that puts out 1050 HP (782.9 kw)
The HPTO wet clutch transfers power to the 64 inch wide 12,100 lb( 5488.5 kg) hammermill. The hammermill is fed by a self governing floor apron and feed roller through a 60”(152.4cm) wide x 40” (101.6cm) high feed opening. The high capacity 315 cu. Ft. (11.66 cu. yd.) (8.91cu.m.) hopper will handle the largest trees and stumps.
Features Include:
• Caterpillar C27 1050 HP (782.9 kw) Tier II diesel engine.
• PT-Tech HPTO 15 microprocessor controlled wet clutch.
• Enclosed engine compartment with convenient access doors
• Self cleaning air intake system
• 30 ft. x 48 in. wide oscillating stacking conveyor.
• 10 groove belt drive connects the wet clutch to the hammermill.
• 12,100 pound (5488.47kg) 64 in. wide hammermill
• 24 hammers with a tip swing of 51 in.(129.54cm)
• 60 in.(152.4cm) wide x 40 in. high(101.6cm) feed opening.
• Self governing floor apron and feed roller (42 in.(106.68cm) diameter).
• Large 315 cu. Ft.(11.66Cu. YD.)(8.91Cu M) hopper; 61.5 in. (156.2cm) wide x
248 in. (629.9cm) long.
• Four Hydraulic stabilizer legs
• 91,500 pounds (41,503.7kg) of well engineered construction.