OVERVIEW
Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.
Aquatech Sewer Cleaning Trucks are user-friendly but also tough enough to tackle any application. These Jet/Vac Combination units use high-pressure water jetting combined with a high-flow vacuum source to clean out pipes and sewers and then vacuum up the material, which returns and maintains normal sewer flow.
Aquatech offers two different design options. The B-Series features the reel mounted on the rear of the truck, which reduces heat and noise for the operator and is ergonomically beneficial. The F-Series is a more conventional front-mounted design.
BROCHURE
2.21MB
SPEC SHEET
2.21MB
OVERVIEW
Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.
BROCHURE
2.21MB
SPEC SHEET
2.21MB
STANDARD FEATURES
SINGLE ENGINE DRIVE
Dramatically decreases fuel consumption, maintenance expenses, sound levels, weight on chassis and initial purchase price.Chassis engine powers all systems.
DRIVE SPLIT SHAFT
PTO Polychain.
REAR MOUNTED HOSE REEL
The 180°articulating rear reel facilitates placement of unit regardless of manhole location.The rear location assures unobstructed vision for the driver, allows maximum air flow to the chassis engine and provides the quietest workstation in the industry.
FULL POWER, 270° ROTATING BOOM
The top loading boom is self-cleaning, powers up/down and extends to 14.5 feet. Top mounting produces even load distribution.
VACUUM HOSE
The heavy-duty, wire-reinforced rubber, 6” hose is designed to prevent wear and clogging.Vacuums up bottles, cans and bricks over 150 feet in depth.
CYLINDRICAL DEBRIS TANK
High-strength steel is corrosion and abrasion-resistant.Has more usable space for larger loads than any other design. Capacities of 6 cu.yds.
LIGHTWEIGHT WATER TANKS
Fully baffled 3/8” thick, W.V.stabilized, non-corrosive polyethylene saddle tanks.
Capacity 500 gallons.
TRIPLEX RECIPROCATING WATER PUMP
35-45 GPM capacity, continuous flow triplex reciprocating water pump is rated at 0-2000
PSI and is designed to operate dry.
INTERNAL BOOM VALVE
Increases air velocity, builds instantaneous vacuum to 204”of negative water pressure
for picking up materials above and below water.
VACUUM CUT-OFF SYSTEM
Fail safe protection prevents materials from entering positive displacement exhauster and passing into the atmosphere.
LOWEST CENTER OF GRAVITY
Makes full loads more stable during transport.
PNEUMATIC FOOT CONTROL
Permits one-man operation of hose reel payout/retrieve, and allows operator to work
any distance from unit.
USAGE & BENEFITS
Ideal for any size municipality, water and sewer district, or contractor who is cleaning storm drains, catch basins and/or sewers. Excellent for sanitary and storm sewer cleaning, water leak repair and emergency excavation. Also ideal for sewer line bypass for sewer repair/relining/replacement work.
Multiple sizes of debris and water capacities combined with various water and vacuum pump options allow customers to custom fit an Aquatech unit to any application.
GENERAL DESCRIPTION
AIR/VAC SYSTEM
Positive displacement exhauster
2100 CFM (3568m 3/hr) operating capacity
204” (5182mm) water column
Belt drive
Muffler Drive
Protected by micro-filter/centrifugal separator
Vacuum relief valves
DEBRIS TANK
Cylindrical design
6 cu. yd. capacity
Hydraulic power up/down double acting cylinder
45” dumping angle
Self aligning closure seal
Top-hinged full opening rear door
Two 5” (127 mm) liquid level sight eyes
Debris deflector plate
Double strainer for rear door
Rear door security prop
Four mechanical rear door locks
Rear door power up/down cylinder
Stainless steel ball check valve
6” (152 mm) quick opening rear door valve
6” (152 mm) x 15’ (4.42 m) discharge hose
BOOM ASSEMBLY
Top mounted
270” hydraulic rotation
Portable pendant, controls all functions
Internal boom valve
6” (152 mm) extra heavy duty rubber intake hose
Extends to 14.5’ from base
Power up/down
Rear storage location
WATER SYSTEM
Triplex reciprocating
35-45 GPM (137-174 lit.) capacity
0-2000 psi (138 bar)
PolyChain drive
Water flow control valve
Water pressure gauge
Pressure relief valve
Air valve on pump for cold weather operation
Wash down gun connection
Wash down gun with 35’ (10.7 m) of 1/2” (12.7 mm) hose
800 PSI (55 bar) relief valve
WATER TANK
500 gal. (1893 lit.) usable capacity
3/8” (9.52 mm) UV stabilized polyethylene
Saddle tanks independent of debris tank
Full baffled
Anti-syphon air gap protection
Curb side full
2 liquid level indicators
Removable inspection covers
Limited lifetime warranty
HOSE REEL
Rear mounted
180” hydraulic articulation
Automatic positioning lock
400’ (122 m) of 3/4” (25.4 mm), 2500 PSI hose
(172 bar) hose
650’ (198 m) of 3/4” (25.4 mm) hose capacity
Reel speed control valve
Hose level wind
Hydraulic drive
Pneumatic foot control valve
Automatic positioning lock
Engine throttle
Vacuum/pressure gauge
Tachometer
POWER TAKE-OFF
Split shaft transfer case
Pneumatic shifting
ACCESSORIES, STANDARD
Hinged tank support prop
6” x 8’ (203 mm x 2.4 m) aluminum extension tube
6” x 6’ (203 mm x 1.8 m) aluminum intake tube
Two operation, parts and service manuals
(units only)
15” nozzle
35” nozzle
Manhole hose guide
Painted one color, acrylic enamel
Touch-up paint
Two side tool boxes
Tube storage carriers on front bumper
Aluminum fenders
Mud flaps
COLLECTION OF VIDEOS AND PICTURES
MEDIA GALLERY
Hi-Vac Corportations — 2:02 min.
